Wholesale Corset Making Supplies

Boning Coils - Hoopsteel #50-8406-06. 06mm (1/4") wide, .6mm thick. Sold in a 25 meter coil.
 

***Temporarily out of Stock*** The supplierwill not have stick until summer 2022. We may be able to get 7mm coil.  Please fill out the Contact Us form if you are interested in the 7mm.

Boning Coil - Corset Steel #50-8406-06 

• Steel with White coating
• 06mm (1/4") wide
• .6mm thick 
• Archival - won't rust
• Sold in 100 meter coil
• Made in Germany

Hoop Steel Coil - 10mm wide - 30 meters #50-8406-10.  .6mm thick. Sold in the 30 meter coil.
 

Boning Coils - Hoopsteel #50-8406-14. 14mm (9/16") wide, .6mm thick. Sold in the 25 meter coil.

Hoop Steel Coil #50-8406-14. 14mm (9/16") wide, .6mm thick. Sold in the 50 meter coil.

When you need to custom cut several sizes of spiral boning for theater or opera costumes, this coil of spiral steel boning for corsets is the wholesale way to go. It is wonderful for costuming and special techniques since it not only moves forward and back, but it also is bendable side to side to take a curve.

Using a heavy duty wire cutter, clip the wire on the outermost left and right side of at the length you desire and the center coils will pull away without springing. Don't forget to pick up some bone tips to cap off the loose ends.

Boning Coils - Spiral Boning #47-8000-96. 55 yards of 1/4" (6 mm) wide. Galvanized wire.

When you need to custom cut several sizes of spiral boning for theater or opera costumes, this coil of spiral steel boning for corsets is the wholesale way to go. This size can also be used in the top of a farthingale as it can be curved on its flat side. Using a heavy duty wire cutter, clip the wire on the outermost left and right side of at the length you desire and the center coils will pull away without springing. Don't forget to pick up some bone tips to cap off the loose ends.

Boning Coils - Spiral Boning #47-8000-96. 10 yards of 1/4" (6 mm) wide.

When you need to custom cut several sizes of spiral boning for theater or opera costumes, this coil of spiral steel boning for corsets is the wholesale way to go. Flexible front to back and side to side. 

Using a heavy duty wire cutter, clip the wire on the outermost left and right side of at the length you desire and the center coils will pull away without springing. Don't forget to pick up some bone tips to cap off the loose ends.

Boning Coils - Spiral Boning #28-8001-96. Priced 10 yard cut of 7/16" (11 mm) wide.

These plastic bones are sold by the coil and are of excellent quality. They are far superior, in our opinion, to Ridgelene. They come in four different widths, can be sewn through and are easily cut with scissors. 

The cut ends do not fray and any rough bit can easily be removed with a swipe of an emery board. They are unaffected by water which allows them to be used in swim wear or hand washable garments. 

German Plastic comes packaged in coils. When sliding these bones into a casing, alternate the direction of the arc/curve. If you slide all pieces into their channels with the curve going in the same direction you will get a "warped" garment, to avoid this effect alternate the direction of the curve of each bone.

Boning Coils - 5mm (3/16") German Plastic Boning. Priced per 25 meter coil.

Boning Coils - 7mm (5/16") German Plastic Boning. Priced per 100 meter coil. 

These plastic bones are sold by the coil and are of excellent quality. They are far superior, in our opinion, to Ridgelene. They come in four different widths, can be sewn through and are easily cut with scissors. 

The cut ends do not fray and any rough bit can easily be removed with a swipe of an emery board. They are unaffected by water which allows them to be used in swim wear or hand washable garments. 

German Plastic comes packaged in coils. When sliding these bones into a casing, alternate the direction of the arc/curve. If you slide all pieces into their channels with the curve going in the same direction you will get a "warped" garment, to avoid this effect alternate the direction of the curve of each bone.

Boning Coils - 7mm (5/16") German Plastic Boning. Priced per 25 meter coil. 

Boning Coils - German Plastic Boning - 11mm wide - 100 meters

These plastic bones are sold by the coil and are of excellent quality. They are far superior, in our opinion, to Ridgelene. They come in four different widths, can be sewn through and are easily cut with scissors. 

The cut ends do not fray and any rough bit can easily be removed with a swipe of an emery board. They are unaffected by water which allows them to be used in swim wear or hand washable garments. 

German Plastic comes packaged in coils. When sliding these bones into a casing, alternate the direction of the arc/curve. If you slide all pieces into their channels with the curve going in the same direction you will get a "warped" garment, to avoid this effect alternate the direction of the curve of each bone.

Boning Coils - 11mm (7/16") German Plastic Boning. Priced per 25 meter coil.

These plastic bones are sold by the coil and are of excellent quality. They are far superior, in our opinion, to Ridgelene. They come in four different widths, can be sewn through and are easily cut with scissors. The cut ends do not fray and any rough bit can easily be removed with a swipe of an emery board. They are unaffected by water which allows them to be used in swim wear or hand washable garments. German Plastic bones come packaged in 100 meter spools and coil up naturally due to this. When sliding these bones into a casing, alternate the direction of the arc/curve. If you slide all pieces into their channels with the curve going in the same direction you will get a "warped" garment, to avoid this effect alternate the direction of the curve of each bone.

Boning Coils - 13mm (1/2") German Plastic Boning. Priced per 50 meter coil.

These plastic bones are sold by the coil and are of excellent quality. They are far superior, in our opinion, to Ridgelene. They come in four different widths, can be sewn through and are easily cut with scissors. 

The cut ends do not fray and any rough bit can easily be removed with a swipe of an emery board. They are unaffected by water which allows them to be used in swim wear or hand washable garments. 

German Plastic comes packaged in coils. When sliding these bones into a casing, alternate the direction of the arc/curve. If you slide all pieces into their channels with the curve going in the same direction you will get a "warped" garment, to avoid this effect alternate the direction of the curve of each bone.

Boning Coils - 13mm (1/2") German Plastic Boning. Priced per 25 meter coil.